Custom Dynamics ProBEAM PB-SCOUT-RR-BR Kurulum Talimatları

Motosiklet Aksesuarları Custom Dynamics ProBEAM PB-SCOUT-RR-BR için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Custom Dynamics ProBEAM PB-SCOUT-RR-BR 2 sayfaları. Scout rear turn signal

Sayfayı Yazdır

We thank you for purchasing the Custom Dynamics® ProBEAM® Scout Rear Turn Signals! Our LEDs offer maintenance free

service and higher visibility. Our ProBEAM® product line utilizes the latest technology and automotive grade components to

ensure the highest level of reliable service. Custom Dynamics® offers one of the best warranty programs and customer sup-

port in the industry. If you have any questions during the installation of this product please call us at 1(800) 382-1388.

Part Number: PB-SCOUT-RR-BR PB-SCOUT-RR-BS

PB-SCOUT-RR-CR PB-SCOUT-RR-CS

US Patents: D830,597 D830,596

Chinese Patents: ZL201830045649.4, ZL201830409102.8

Package Contents:

- ProBEAM® Scout Rear Turn Signals (Pair)

- Instructions

Fitment: 2015-2022 Indian® Scout & Scout Sixty (Does

NOT fit Scout Bobber models).

Custom Dynamics® ProBEAM® Scout Turn Signals can ONLY be used with

ProBEAM® Bullet Style Turn Signal Lenses. Bullet Bezel Turn Signal

Adapters are not compatible with ProBEAM® Scout Turn Signals.

ATTENTION

Please read all Information below before Installation

Warning:

Disconnect negative battery cable from battery; refer to owner's manual.

Failure to do so may result in electrical shock, injury, or fire. Secure negative

battery cable away from positive side of battery and all other positive voltage

sources on vehicle.

Safety First:

Always wear appropriate safety gear including safety glasses when

performing any electrical work. It is highly recommended that safety glasses be

worn throughout this installation process. Be sure vehicle is on level surface, se-

cure and cool.

NOTE: If installed with a GEN-SMART-TPU-SCOUT module, the turn signal run

function will need to be turn off on the GEN-SMART-TPU-SCOUT module. Refer to

the GEN-SMART-TPU-SCOUT module programming section of the GEN-SMART-TPU

-SCOUT module instructions.

NOTE: Turn Signals function as run and turn only.

Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST

Custom Dynamics® ProBEAM®

Installation:

1. Remove motorcycle seat and disconnect the negative battery ca-

ble from the battery. Consult your owners manual if unsure of this

process.

2. Locate the rear lighting harnesses and connectors behind the rear

fender as shown in Photo 1. Cut the wire ties to free the rear

lighting wiring harnesses .

Scout Rear Turn Signal

Installation Instructions

12-2021