DK Digital CDB-400 Kullanıcı El Kitabı - Sayfa 7

Kayıt Ekipmanları DK Digital CDB-400 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. DK Digital CDB-400 13 sayfaları. Portable cd radio recorder

Sayfayı Yazdır

CD operation

This device plays generally audio CDs as well as CD-R(W) media burnt with a PC. Due to the

various types of blank CDs, PC types, operating systems, burning software and methods,

we cannot guarantee that every burnt CD will be played immaculately. The device does not

play CD-ROMs or DVD media.

How to handle CDs

Only touch CDs at the edges to avoid finger prints and dirt.

Clean dirty CDs carefully with a soft non-fluff cloth by wiping from

the middle to the outside. Avoid circulating movements! Do not

use any solvents as this may damage the CD.

Do not use any inscriptions and labels on your CDs. This could

damage the CD or lead to unbalance which might impair playback and

the device.

CD playback

Move the FUNCTION switch to the CD position.

First lay down the carrying handle. Then you can open the CD compartment by carefully

pressing on the "PUSH TO OPEN" field. Insert a CD with the label side up onto the spindle

of the CD plate.

Close the CD compartment by carefully pushing down the cover of the CD compartment

and slightly press the PUSH TO OPEN area until it clicks into place. The device is then

reading the CD. Now the display shows the total number of tracks on the CD.

To start playback, press the PLAY/PAUSE button. The CD display shows the respectively

played track number and "PLAY". Press this button again to pause playback. "PLAY" will

flash then. Pressing the PLAY/PAUSE button again continues the playback process.

Press the STOP button to stop playback. Now the display shows the total number of

tracks on the CD.

Please always press the STOP button first before opening the CD compartment.

Select tracks

During playback you can briefly press the

or subsequent track. Keep the button pressed to activate the search function (high-speed

playback). When the desired location is reached, release the button to resume normal

playback.

Repeat function

If you press the REPEAT button once during playback, "RPT" will flash in the display, and the

track currently being played will be repeated. If you press this button twice, the whole CD

will be repeated and "RPT" is constantly displayed. The track(s) will be repeated over and

BACK or

NEXT button to select the previous