DK Digital CDB-650 Kullanıcı El Kitabı - Sayfa 9

Kayıt Ekipmanları DK Digital CDB-650 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. DK Digital CDB-650 12 sayfaları. Portable cd/mp3 radio recorder

Radio operation

Ø
Move the function switch to the RADIO position. Select the desired frequency range
using the BAND switch.
Ø
For FM reception you need to pull out the telescope antenna on the rear side of the unit.
Turn the antenna to find the best antenna orientation.
For AM reception the device has a built-in antenna. If AM reception is noisy or distorted,
please turn the unit to find the best orientation.
Ø
Use the TUNING control to select the broadcasting stations. The dial scale behind the
TUNING knob will help you to locate stations.
Ø
When receiving FM Stereo transmission, the FM ST indication is activated. For MONO
transmission or weak, noisy reception, put the BAND switch into FM position to improve
the sound quality.

Cassette operation

Do not use C-120 tapes or very cheap tapes. This may lead to malfunctioning and tape
spillage. Before inserting a tape please ensure that the tape reels run smoothly and that
there are no tape loops. Otherwise this might result in tape spillage.
The tapes are equipped with plastic clips which can be
removed to secure recordings against re-recording or erasing
(see Fig.). The resulting deepening may be covered with
adhesive tape to re-record the tape.
ATTENTION!
When you have removed the erase protection, the record button will be locked and cannot
be pressed! These plastic clips are also removed in commercial music tapes.
Play Tapes
Ø
Put the function switch into the position TAPE.
Ø
Press the button
recorded tape with tape opening upwards into the cover bracket. The full tape reel
should be on the right side.
Ø
Carefully close the cover by slighting pressing down the cover of the cassette
compartment. Press the play
Ø
If you want to interrupt the playback for a short time only, press the
If you press this button again, the playback will continue.
Ø
You may discontinue the playback by pressing the
Fast Forward and Rewind
You can run forward and rewind the stopped tape. Use the
forward and the
position, press the
rewind functions during playback. This may cause damage to the tape.
Record Tapes
Put a cassette into the compartment: The side to be recorded must be visible from the
outside. The full tape reel has to be on the right side. Any previous recordings will be
/ STOP/EJ. The cassette compartment opens, and you can insert a
/ PLAY button . The tape will be played.
/ REW button for fast rewind. When you have reached the desired tape
/ STOP/EJ. button to stop the process. Never use the fast forward or
/ STOP/EJ. button.
9
/ PAUSE button.
/ F.FWD button for fast