Altronix NetWaySP1BTWPN Kurulum Kılavuzu - Sayfa 5
Medya Dönüştürücü Altronix NetWaySP1BTWPN için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Altronix NetWaySP1BTWPN 8 sayfaları. 802.3bt media converter/injectors
Ayrıca Altronix NetWaySP1BTWPN için: Kurulum Kılavuzu (12 sayfalar)
Sayfayı Yazdır
Input/Data Connections:
1 . Connect structured cable from port marked [Data Port] on NetWaySP1BT to a PoE midspan/endspan
(Fig. 3, pg. 5) .
2 . Connect fiber optic cable to a fiber SFP module . Connect the module to the port marked [SFP] on the
NetWaySP1BT . Connect the other end of fiber cable to an SFP module of a remote device .
SFP LED will illuminate indicating data connection (Fig. 3, pg. 5) .
3 . Using 4-pair CAT5e or higher cable connect PoE load device to be powered to the port marked
[802 .3bt Output] on NetWaySP1BT . After authentication and classification have been established,
[PoE Signal] LED will illuminate indicating PoE presence .
Fig. 3
IEEE 802.3af, 802.3at and 802.3bt
compliant port rated up to 90W max
Yellow LED
10/100 Mbps
48VDC to 56VDC
PoE LED indicates PoE present
Fig. 4
From power supply
PoE+ (90W) PTZ
NetWaySP1BT Series
48-56VDC
– Input +
-- +
Input
Typical Application:
NetWaySP1BT
802.3bt Converter/Injector
Input:
48–56VDC
Output: IEEE 802.3bt (90W)
48-56VDC
802.3bt
PoE
-- Input +
Output
Signal
CAT5e/6
802.3bt
PoE
Data
Output
Signal
Port
NetWaySP1BT
Converts Ethernet or Fiber to
802.3bt PoE port
Data
Fiber
Port
SFP
Signal
Data from Midspan/Endspan
Green LED 1000 Mbps
One (1) Gb SFP port
for Fiber
Fiber
SFP
Signal
SFP LED Indicates
data connection
Ground Terminal
Fiber
OR
CAT5e/6
Ethernet Data Port
- 5 -