DK SONIC DK-2200FTS Kullanıcı Kılavuzu - Sayfa 6

Ultrasonik Mücevher Temizleyici DK SONIC DK-2200FTS için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DK SONIC DK-2200FTS 8 sayfaları. Ultrasonic cleaner

Sayfayı Yazdır
DK SONIC DK-2200FTS Kullanıcı Kılavuzu

DIFFERENT WAYS OF CLEANING

Gennral Cleaning—
use only water to clean under the temperature of about 50℃;
Enhanced Cleaning—
detergent, or any other non-acidic cleaning agents.
Extensive Cleaning--
recommended to use specific cleaning solution associated with ultrasonic cleaners.
WARNING
: Strong acid or alkaline cleaning solution will cause corrosion, rust and
even puncture of tank or machine body. To solve this problem, please dilute the solution
to mild PH or use a special tank made of a specific-graded stainless steel, like SUS304.
The cleaning solution will deteriorate in effectiveness over time and use. It is important
to regularly change the fluid and carefully wash the inside of the cleaning tank in order
to preserve the effectiveness and longevity of the cleaner. Do not use corrosive or
abrasive cleaning tools to clean the tank which must be wiped down and dried before it
can be re-connected to the electrical supply.
NOTE: If the machine starts to spark, smoke, smell of burnt electrics or displays any
other fault the operator must immediately stop the machine, and isolate it from the
electrical supply and contact the supplier. It is dangerous to use it after that.
Shenzhen DeKang Electronic Cleaning Appliances Co.,Ltd
2F, Building 8, Yuanling Industrial Park, Shangwu Community, Shiyan Street, Bao'an District, Shenzhen
Tel.: +86-0755-23575005
add few drops of standard cleaning solutions, liquid soap, or
removing tarnish, carbon & rust from non-plated metals, it is