Artison RCC300-CM Kurulum Kılavuzu - Sayfa 10

Subwoofer Artison RCC300-CM için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Artison RCC300-CM 15 sayfaları.

2. The Red Switch is the input voltage setting; select the appropriate 120V or 230V setting.

3. Connect the detachable IEC Power Cord underneath the Red Voltage Selection Switch.

AUDIO OUTPUTS

1. Connect the speaker wires to the Binding Posts.

NOTE: Red is Positive and Black is Negative.

2. Use either Bare Speaker Wire or Banana Plugs to terminate the speaker wire.

1. Connect to either the Balanced Female XLR or Unbalanced Female RCA Inputs.

NOTE: Both inputs have been calibrated to the same sensitivity level. Use a

Y-Adapter when using the Unbalanced RCA's for best performance.

AUDIO OUTPUTS

1. Connect to the Unbalanced Female RCA Outputs.

2. Set the High Pass Crossover to the desired frequency. The slope is set at 12 dB/octave.