DK-TEC HNEFGC Kullanıcı Kılavuzu - Sayfa 7
Çiftlik Ekipmanları DK-TEC HNEFGC için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DK-TEC HNEFGC 16 sayfaları. Flail mower
Sayfayı YazdırPreparation in case of an emergency:
Be prepared if a
fire
is being done. Also have the numbers of doctor, ambulance, hospital nearby.
Always wear protective clothing/equipment when working with the machine:
•
Always
clothes suitable for the job. Avoid loose-fitting clothing.
wear
•
Prolonged exposure to loud noise can cause hearing impairment or hearing loss. Wear
suitable hearing protection such as hearing protection and earplugs.
Avoid fluids on the body:
•
Outflowing fluid under pressure can penetrate the skin and cause serious damage.
•
Avoid danger by relieving pressure before disconnecting any hydraulic lines.
•
Use a piece of paper or cardboard, not body parts, to check for suspected leaks.
•
Wear protective gloves and safety glasses when working with hydraulic systems.
•
If an accident occurs
with the skin must be treated within a few hours!
Safety labels
It is important to always respect safety ethics
Your flail mower is equipped with a lot of safety labels. They are designed to help you safely
with the operation of your machine. Always read and follow the instructions.
1. Keep all safety labels clean and legible.
2. Replace all damaged or missing labels. If you want to order new labels, cash DK-TEC.
3.
ordering new parts for your machine, make sure you get the correct safety labels.
When
4. Please refer to this section for correct label placement. To put new labels on:
A. Clean the area where the label will be placed.
B. Spray soapy water on the surface where the label will be placed.
C. Take the adhesive back of the label. Press firmly on the surface.
D. Squeeze out all air bubbles with the edge of a credit card or using some cardboard.
occurs. Always have a fire extinguisher and a first aid kit nearby where work
seek medical attention immediately
,
All liquids that come into contact
.
09/2019
6