ARTIST 22 Plus Manuel - Sayfa 8
Monitör ARTIST 22 Plus için çevrimiçi göz atın veya pdf Manuel indirin. ARTIST 22 Plus 17 sayfaları.
Sayfayı YazdırDrag to select an area: Drag the cursor from one point to another within the red
1)
area.
2)
Use the cursor to select an area: Select "Click to set screen area", then click the
upper left corner position and lower right corner position to select on the screen.
3)
Coordinates: Manually enter coordinates in the corresponding input boxes for X, Y, W
and H.
Identify:
Identify all connected monitors. The numeric identifier will be displayed in the lower left corner
of each monitor.
Calibration:
Hold the stylus in your usual way and click the center of the red cross on the monitor to
calibrate the offset between the stylus and the cursor.
Drawing Tablet
You can set the work area of current device here. The driver enables the following ways to set
the work area of the device:
8