Artist Guitars BSK20V2 Manuel - Sayfa 7

Amplifikatör Artist Guitars BSK20V2 için çevrimiçi göz atın veya pdf Manuel indirin. Artist Guitars BSK20V2 10 sayfaları.

BKS20V2

5. Reverb Channel Selector

This switch controls which channel has reverb. Pushed in, channel 1 has

reverb, and when it's clicked out again, channel 2 has reverb.

6. Channel 2 Input

This is where you plug in your guitar for Channel 2.

Channel 2 Gain Control

This knob controls the preamp gain for Channel 2. As you turn the knob

clockwise, the gain will increase, resulting in a louder signal. When it

gets closer to 10, there may be some slight break up or drive.

8. Channel 2 Boost Switch

This switch adds a boost in volume to channel 2. This helps if you're

using an electric guitar and want a more overdriven sound. It also helps

for guitars with lower output volume to really shine.

9. Channel 2 Bass EQ Control

This knob controls the amount of low-end frequency in your guitar tone.

As it's turned clockwise towards 10, the amount of bass in the guitar

tone will increase. If it's set at 0, there will be less bass.

10. Channel 2 Middle EQ Control

This knob controls the amount of mid-range frequencies in your guitar

tone. As it's turned clockwise towards 10, the amount of mid-range

frequencies in the guitar tone will increase. If it's set at 0, there will be

less mid-range.

11. Channel 2 Treble EQ Controll

This knob controls the amount of high-end frequency in your guitar

tone. As it's turned clockwise towards 10, the amount of treble in the

guitar tone will increase. If it's set at 0, there will be less treble.

12. Channel 2 Level Control

This controls the volume of channel 2. Turn the knob clockwise towards

10 to increase the volume.