Artistic Licence railSplit dmx Kullanıcı Kılavuzu - Sayfa 4

Aydınlatma Ekipmanları Artistic Licence railSplit dmx için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Artistic Licence railSplit dmx 8 sayfaları.

Sayfayı Yazdır
DMX512 Wiring
XLR Pin (Convention)
Overview
railSplit dmx is a uni-directional DMX512 splitter and distribution amplifier. By design, railSplit
dmx does not support RDM, allowing a cost-saving to be passed on to those customers who
do not require bi-directionality. Customers requiring RDM functionality should order the sister
product, railSplit RDM, as opposed to railSplit dmx.

Key features

y Input Optical Isolation
y Six independent outputs
y Uni-directional outputs
y DMX512-A compatible
y Surface mount or DIN rail mounted
railSplit dmx User Guide
1
2
3
Function
Ground
Data -
Data +
Connections
Input
The DMX512 input is attached via three screw
terminals. Please refer to the connections
diagram.
Loop-through
A passive loop-through connection allows
onward connection to other DMX512 devices.
If this feature is not required then the signal
must be terminated. The product contains an
internal termination resistor. This is enabled by
fitting a wire link between the screw terminals
that will terminate the DMX line (Term and
DAT+).
Output
Six DMX512 outputs are provided. Each output
is capable of driving 32 additional DMX512
devices. It is not necessary to terminate any
outputs that are not connected. However, a
terminator must be connected to the final
DMX512 device.
Colour
Black
Blue
Red
Page 4