Customatic Galaxy CUSGX01 Kullanıcı El Kitabı - Sayfa 9

İç Mekan Mobilyaları Customatic Galaxy CUSGX01 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Customatic Galaxy CUSGX01 16 sayfaları. Adjustable bed

Sayfayı Yazdır

Pairing your remote control to your adjustable bed

Your adjustable bed is already paired to your remote control at the factory. Manual pairing is only needed for

replacement remote controls or to change tandem systems back to a single system.

NOTE:

For the pairing to be successful, make sure the distance between the control box and the remote control is

not more than 2 meters.

Plug your adjustable bed to a working electrical outlet. A surge

protector is recommended.

The control box automatically enters and stays in pairing mode

for 7 seconds.

On the remote control, press the

together for 3 seconds.

The LED light on the control box lights up and remains on,

which means the pairing is successful.

Your remote control is now successfully paired with your

adjustable bed.

Synchronizing two beds for tandem operation

To operate two adjustable beds simultaneously, you must pair both beds (Bed A and Bed B) to one remote

control (Remote A).

Plug both Bed A and Bed B to working electrical outlets. A surge

protector is recommended.

FLAT

Press the

button on Remote A and Remote B to align the

beds properly in a flat position.

Unplug and then plug Bed B again to put it back into pairing

mode. Pairing mode lasts for 7 seconds.

Using Remote A, press the

for 3 seconds. The LED light on the control box lights up and

remains on, which means the pairing is successful.

Bed A and Bed B can now be controlled simultaneously using

Remote A.

NOTE:

When operating beds in tandem, both beds should

always be plugged into working electrical outlets.

Remote Control Guide

LED

and

Foot Up

() buttons

LED

and

Foot Up

() buttons together

LED light on the control box