Artistic License Art-Switch PoE4 Kullanıcı Kılavuzu - Sayfa 2

Ağ Yönlendiricisi Artistic License Art-Switch PoE4 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Artistic License Art-Switch PoE4 4 sayfaları.

Sayfayı Yazdır
The Product:
Connections
2
Port E
RJ45
4
DC Power
2pin Screw Terminal
13
Port A
RJ45
16
Port B
RJ45
19
Port C
RJ45
22
Port D
RJ45
Indicators
1
Port E Duplex
3
Port E Speed
5
Power
6
Port E Activity
8
Port A Activity
9
Port B Activity
10
Port C Activity
11
Port D Activity
12
Port A Speed
14
Port A PoE Active
15
Port B Speed
17
Port B PoE Active
18
Port C Speed
20
Port C PoE Active
21
Port D Speed
23
Port D PoE Active
Other
7
Ventilation
Operation:
Art-Switch PoE4 is used to connect Ethernet / Art-Net nodes together. It provides data communication and power for up to four devices.
Please refer to the wiring diagram on the opposite page for more information.
All settings are factory configured and Art-Switch PoE4 has been set up as an un-managed Ethernet Switch. There are some settings that
are configured automatically:
Auto-Negogiate: When a new connection is made Art-Switch will auto detect the speed for each port individually. It will always default ot
the highest speed.
Auto Cable Detection: There are two types of Ethernet cables that are used to connect equipment together; Patch and Cross-Over. Art-
Switch has auto cable detection so either type can be used to connect any type of Ethernet device.
Connecting Art-Switch to:
Ethernet Switch
Computer or Node
Earthing:
In some circumstances Art-Switch may need to be connected to Mains Earth. Under the top left terminal guard there is a connection to
the Cable Shield that can be connected to Mains Earth.
The Cable Shield is referenced to logic ground by a capacitor / resistor network as specified in the Ethernet standard.
Green
On = Full Duplex
Yellow
On = 100Base T, Off = 10BaseT
Red
On = Correct, Off = Error
Yellow
On = Link, Flash = Activity, Off, No Connection
Green
On = Link, Flash = Activity, Off, No Connection
Green
On = Link, Flash = Activity, Off, No Connection
Green
On = Link, Flash = Activity, Off, No Connection
Green
On = Link, Flash = Activity, Off, No Connection
Green
On = 100Base T, Off = 10BaseT
Yellow
On = Not Active, Off = Active
Green
On = 100Base T, Off = 10BaseT
Yellow
On = Not Active, Off = Active
Green
On = 100Base T, Off = 10BaseT
Yellow
On = Not Active, Off = Active
Green
On = 100Base T, Off = 10BaseT
Yellow
On = Not Active, Off = Active
Must be kept free from obstruction and be in a ventilated area
Cable to be used:
Cross-Over Cable
Patch/Straight Cable