Customidea GeoPic II Kullanım Kılavuzu - Sayfa 17

Kamera Aksesuarları Customidea GeoPic II için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Customidea GeoPic II 20 sayfaları. Geotagging device for nikon d200/d2hs/d2x/d2xs fuji s5 pro

Sayfayı Yazdır
Setting:
1 Beep
2 Auto off
†
3 Button
†
4 Meter
5 Blink
6 Continuous
7 Alt. Field
8
Search
†
If setting 3 is disabled then setting 4 will be automatically enabled and vice
versa - this is to avoid a situation where it is not possible to turn on the unit.
Changing the settings is easy once you get used to it –
try going through the following example, which shows
how to change the Auto off setting (setting 2) to 10
minutes (option 4):
1) Press and hold the shutter release button half way
then press the function button for around 5 seconds to
enter program mode. Two white flashes confirm that
program mode has been entered and the following
single blue flash shows you that setting 1 is selected.
Nikon D200, D2HS, D2X and D2XS and Fuji S5 Pro are registered
trademarks or a trademark of their respective companies.
16
Option:
1
Enabled
2
Disabled
1
1 min
2
2 mins
3
5 mins
4
10 mins
5
Disabled
1
Enabled
2
Disabled
1
Enabled
2
Disabled
1
Enabled
2
Disabled
1
Enabled
2
Disabled
1
Enabled
2
Disabled
1
Enabled
2
Disabled
GeoPic II user settings
Description:
Enables the beep in low power
and freeze modes.
Enables the auto power down
after the period of inactivity
chosen.
If enabled, the function button
will power up the GeoPic II.
If enabled, the GeoPic II powers
up when camera wakes up.
Enables the green/blue blink in
low power and freeze modes.
Enables continuous sending of
GPS data in freeze mode.
If enabled, in freeze mode the
altitude field is set to 99999m.
Enables searching on power up
in freeze mode.