Altwork UPPER-LOWER MONITOR Montaj Talimatları Kılavuzu - Sayfa 8
Raflar ve Standlar Altwork UPPER-LOWER MONITOR için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Altwork UPPER-LOWER MONITOR 9 sayfaları.
Sayfayı YazdırThe new way to work
Adjust The Monitor
STEP 9:
Use the hex key to remove the cover on the monitor arm to adjust the
friction of the monitor tilt joint.
Hex Key
STEP 10:
Using the tools provided in the Altwork Station tool kit, tighten
the bolt until the mount will stay at the desired angle and not sag under the
additional weight of two monitors, then replace the cover.
Now rout the cords and make sure all signal and power wires are placed in
a way that they will not get pulled during any of the adjustments made to
the Altwork Stations operation.