CustomWorks Enforcer GSX2 Montaj Kılavuzu - Sayfa 7

Oyuncak CustomWorks Enforcer GSX2 için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. CustomWorks Enforcer GSX2 17 sayfaları.

Sayfayı Yazdır

Bag G

Spur Gear Assembly

Bag G

Spur Gear Assembly

-Parts for

Bag G

2228

Slipper Eliminator

Bag H

Transmission Mount

Bag H

Transmission Mount

-Parts for

3308

Bag I

Transmission Brace

- Attach 3229 Body Post to 3308 Trans Brace using 3229 Screw.

- Slide 3201 Post Collar onto the Body Post and secure using 3229 Set Screw.

- Mount the 1202 Trans Spacer to the Chassis using the 5262 Screw where shown.

- Secure the Trans to the Chassis using (2) 5264 Screws thru the 1202 Trans Spacer as shown.

- Attach the 3308 Trans Brace to the Trans and Rear Bulkhead using 5253 Screws.

- Mount the Trans Brace to the Trans and Rear Bulkhead using 5253 Screws.

- NOTE: Align the dogbone shafts into the outdrives of Trans as you mount the trans!

5253

1202

5264

Qty 1

4881

Qty 1

81T 48P Spur Gear

2228

Qty 1

3229

Qty 1

Post Collar

3229

Qty1

3229

Short Body Post

Set Screw

3308

5262

1:1

5252

Qty 2

4-40 x 1/4 BH Screw

4881

- Press the 2228 Slipper Eliminator onto the Top

Drive Shaft so that the Roll Pin keys into the

grooves.

5252

- Secure the assembly to the Top Shaft with the

2228 Spacer and the 5245 Locknut. Do NOT

overtighten the nut on the Top Shaft!

5245

- Mount the 4881 Spur Gear so the flat side faces

AWAY from the transmission. Secure using (2)

2228

5252 Screws.

1202

Qty 1

Trans Spacer

1:1

5264

Qty 2

Qty 1

4-40 x 1/2 FH Screw

- NOTE: Align the dogbone shafts into the outdrives

of Trans as you mount the trans!

2228

Qty 1

Spacer

1:1

3229

Qty 1

8-32 x 1/2 FH Screw

1:1

5253

Qty 4

4-40 x 3/8 FH Screw

1:1

5245

Qty 1

5-40 Locknut

1:1

5262

Qty 1

4-40 x 1/4 FH Screw

3229

3308