ArtiVisuals Mix-iT Kullanıcı Kılavuzu - Sayfa 12

Kontrol Paneli ArtiVisuals Mix-iT için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ArtiVisuals Mix-iT 14 sayfaları.

Update firmware

The current version of the firmware can be checked in the Mix-iT with rotary 1 - IP config

menu, entry 8 - version info, this shows the vMix version and Mix-iT fw version.

The Mix-iT firmware can be updated via Ethernet. First you need to download a zip-file

containing the firmware file together with the update tool for your PC or Mac from the

Mix-iT website - suport.



Before continuing, note down the ip-address of your Mix-iT.



Install the software on the PC



Double click the 'updater' icon



Be sure that the PC is in the same subnet as the Mix-iT



Now enter the IP-address of the Mix-iT in the uploader tool.



In the Mix-iT, enable updating in the IP config menu (rotary 1), entry 9 - Update

firmwre, OK



Powercycle the Mix-iT as indicated



Display should show no text



(If you powercycle the unit once again, it resumes normal operation)



Now press 'connect' in the update tool



If the update tool is able to establish a connection, it shows 'Connected'



You now have 8 seconds to click 'send' in the update tool, after that the Mix-iT wil

restart.



If send is clicked in time, the firmware transfer is started.



When the transfer is done, it shows 'upload finished, disconnected', and the Mix-

iT restarts



Powercycle the Mix-iT

You have now completed the firmware transfer. You can check the firmware version with

rotary 1, entry 8 - version info.

User Guide Mix-iT for vMix v1.0

- 12 -