DKN technology AB 140 Kullanıcı El Kitabı - Sayfa 10

Egzersiz Bisikleti DKN technology AB 140 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. DKN technology AB 140 16 sayfaları. Magnetic air bike

Sayfayı Yazdır

STEP 4

A. Feed the Sensor Wire (38) through the Upright Frame (2) and out from top, feed the

Tension Control Cable (41) through the Upright Frame (2) and out from designed hole

for Controller as shown.

B. Turn the Tension Controller (42) to Level-1, and then install the Tension Control Cable

(41) to the Tension Controller (42) properly as shown in Fig-A. Then lock the Tension

Controller (42) to the Upright Frame (2) with the Phillips Screw (43) and Flat Washer

(44).

C. Attach the Upright Frame (2) to the Main Frame (1) with the Allen Bolts (16), Spring

Washers (17) and Flat Washers (18) as shown. Connect the Sensor Wire (38) with the

wire from the Computer (12), and then lock the Computer (12) on the bracket on top

of the Upright Frame (2) with the Phillips Screws (37) as shown.

- 8 -