artograph MC 250 Kullanıcı Kılavuzu - Sayfa 3

Projektör artograph MC 250 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. artograph MC 250 6 sayfaları. Professional

Loading Copy (Figs. 2-6)

Raise the copy cover and place copy face

down onto the glass surface, close the

cover. To project oversize copy or books,

the copy cover is removable. When remov-

ing the cover, however, it is necessary to

ensure that the micro-switch is depressed

to power on the lamp. The micro-switch

is located on the top surface of the copy

area.

Turn On Power (Fig. 1)

The power rocker switch is located on

the lower backside of the unit. Once the

power is on, the projection lamp will only

turn on when the copy cover is closed or

the micro-switch is depressed. A handy

pilot lamp will glow when the power in on

to provide convenient illumination in the

darkened room.

Projection (Fig. 7)

The projected image size is dependent

upon the distance between the projector

and the projection surface. The MC 250 will

enlarge the copy approximately from 3x up

to 15x that of the original copy size. Refer

to chart below for approximate distance:

Enlargement: 3X

Distance:

3.7'

For best results, in order to achieve a

speciﬁ c enlargement or size, project a

known size original, such as a ruler or

some markings on a piece of paper (e.g.

1/2" increments) and measure the result-

ing image size. Move the projector nearer

or farther away to achieve desired size.

10X

15X

5.5'

10.1'

14.7'