Alula RE110P Kurulum Kılavuzu

Güvenlik Sensörleri Alula RE110P için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Alula RE110P 4 sayfaları. Indoor motion sensor -pet immune interlogix compatible

Sayfayı Yazdır

Resolution Compatibles

The Indoor Motion Sensor

or when the external contact is opened. It is battery

powered and requires no installation tools. A Pyroflex

sensor with HighBar

leading pet immunity and catch performance.

Features

• Industry-leading pet immunity and catch performance

• Supports both motion zone and an external contact zone

• Mountable on walls or in corners

• 5 year warranty

Enroll

by placing the panel into learn mode and then tripping

the tamper switch. Enroll the external contact zone by

inserting the battery with the external contact closed.

Suggested Group Types

• Use Interior Follower for the motion zone

• Use Perimeter for the external contact zone

Install

using the included 3M™ VHB™ tape to adhere the

motion sensor on a wall or in a corner. The tape should

be applied to the back when wall mounting or to the

back bevels when corner mounting. Alternatively, screw

mounting can be done by punching out the screw mounting

holes.

Installation Tips

• Mount 7.5 to 9.5 feet from the floor for an

optimal balance between catch performance

and pet immunity.

• Remove the cover and circuit board before

trying to punch out the screw mounting holes.

• Ensure the bug foam stays intact and

snug around the IR sensing element when

re-installing the circuit board.

External Contact

• Use a normally-closed contact because the

motion sensor will transmit an alarm when it

sees the external contact open.

• Do not use end-of-line resistors.

Verify proper enrollment and operation using your control panel's installation manual.

RE110P Indoor Motion Sensor

-Pet Immune Interlogix

alarms when motion is sensed

signal processing allows for industry-

™

Compatible

™

Mounting Screw Holes

Ceiling

Floor