Alula DWS-LL Hızlı Başlangıç Kılavuzu

Aksesuarlar Alula DWS-LL için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Alula DWS-LL 2 sayfaları. Longlife door/window sensor connect+™ encrypted
Ayrıca Alula DWS-LL için: Hızlı Başlangıç Kılavuzu (2 sayfalar)

Sayfayı Yazdır

LongLife Door/Window Sensor

ten year battery life. Typically used to sense opening and

closings of doors and windows, it will alarm when the

magnet is pulled away from the sensor.

Features

• Industry-leading wireless range

• 10 year battery life

• Quick peel and press mounting

• Secure encrypted wireless transmissions

Enroll

by placing the panel into wireless enrollment mode

and then sending an enrollment signal from the sensor.

Alternatively, the sensor can be enrolled by entering

its 8-character serial number on the interactive service

provider's web portal.

Options for sending an Enrollment Signal

• Remove the battery tab, which can be done

without removing the cover, OR

• Remove the cover to trip tamper

Install

by removing the adhesive paper and adhering the

sensor and magnet on a door or window. Make sure to

align the alignment marks on the sensor and magnet

when mounting.

High Bond Tape works great if the surface is properly

prepared and firm pressure is applied for over 10

seconds.

Surface Preparation

• Clean the surface

• Ensure the mounting surface temperature is

above 50°F

Use the panel installation guide to verify proper system setup.

LongLife Door/Window Sensor

Connect+

™

is a transmitter with a

Encrypted (DWS-LL)