Alula RE106M Manuel

Aksesuarlar Alula RE106M için çevrimiçi göz atın veya pdf Manuel indirin. Alula RE106M 2 sayfaları. Tilt sensor interlogix & qolsys compatible

Resolution Compatibles

Tilt Sensor

is a full-featured security transmitter typically

used to sense the tilt of overhead garage doors and

windows. It will alarm when the sensor is tilted more

than 45 degrees.

Features

• Industry-leading wireless range and battery life

Enroll

by placing the panel into wireless enrollment

mode and then sending an enrollment signal from the

sensor.

Sending an Enrollment Signal

With the battery tab removed, open

the cover to trip tamper.

Install

by mounting the sensor to the inside of

a door or window using the mounting screw

locations. For garage door installations, the

sensor should be mounted to the top panel of

the overhead door. This ensures that the sensor

closes only when the door is fully closed, and is

best for RF range.

Tilt Detection

exceeds a 45 degree angle. If the

sensor rotates further than 135

degrees, it is likely to remain in a

non-alarm state. For best results,

the sensor should rotate within 90

degrees to ensure an alarm state

occurs.

Use the panel installation guide to verify proper system setup.

RE106M Tilt Sensor

Interlogix

occurs when the sensor

& Qolsys

™

Mounting

Screw

Holes

Compatible

Cover-Securing

Screw Hole