Alula RE601 Kurulum Kılavuzu

Aksesuarlar Alula RE601 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Alula RE601 4 sayfaları. Door window sensor
Ayrıca Alula RE601 için: Hızlı Kılavuz (4 sayfalar)

Sayfayı Yazdır

RE601 Door Window Sensor

transmitter with industry-leading wireless range and battery

life. It is typically used to sense opening and closing of

doors and windows, but can secure just about anything using

its two external contact zones. It will alarm when the magnet

is pulled away from the sensor or when an external contact is

opened.

Features

• Industry-leading wireless range and battery life

• One door window zone and two external contact zones

• Secure encrypted wireless transmissions

• 5 year warranty

Enroll

by placing the panel into wireless enrollment mode,

and then sending an enrollment signal from the sensor by

removing the cover to trip the tamper. Alternatively, the

sensor can be enrolled by scanning its bar code using the

Connect+ Installer App or by entering its 8-character serial

number on the interactive service provider's web portal.

Install

by mounting the sensor and magnet on a door or

window using the mounting screw locations. Make sure to

align the alignment marks on the sensor and magnet when

mounting. Additionally, the sensor can be used with up to

two external contacts. CE installations must use a cover-

securing screw.

External Contacts (

• Use normally-closed contacts because the door

window sensor will transmit an alarm when it

sees an external contact open.

• Do not use end-of-line resistors.

• Wire contact wires to one or both outside

terminals, using the center terminal as

common.

Use the panel installation guide to verify proper system setup.

RE601 Door Window Sensor

Connect+

is a full-featured security

not evaluated by ETL

Encrypted

™

)

Mounting Screw Holes

Cover-Securing Screw Hole