Alula RE617 Manuel - Sayfa 7

Güvenlik Sistemi Alula RE617 için çevrimiçi göz atın veya pdf Manuel indirin. Alula RE617 9 sayfaları. Connect+ encrypted heat alarm

Sayfayı Yazdır

WARNING!

CONSTANT EXPOSURES TO HIGH OR

LOW TEMPERATURES OR HIGH HUMIDITY

MAY REDUCE THE BATTERY LIFE.

Use only batteries specified in marking.

Use of a different battery may have a

detrimental effect on Alarm operation.

These cells are intended for use at ordinary

temperatures where anticipated high

temperature excursions are not expected to

exceed 100°C (212°F). Prolonged periods of

alarm will also reduce batteries life.

Caution: The batteries used in this device

may present a fire or chemical burn

hazard if mistreated. Do not recharge,

disassemble, heat above 100°C (212°F)

or dispose of in fire. Replace batteries

with Panasonic

CR123A, use of another

batteries may present a risk of fire or

explosion.

6.4 Cleaning your Alarm

Clean your Alarm regularly. Use a soft

bristle brush or the brush attachment of

your vacuum cleaner to remove dust and

cobwebs from the side slots where the

heat enters. To clean the cover, wipe with a

damp cloth and dry thoroughly.

WARNING: DO NOT PAINT YOUR

ALARM.

Other than the maintenance and cleaning

described in this leaflet, no other customer

servicing of this product is required.

Repairs, when needed, must be performed

by the manufacturer.

6.5 End of life

The entire Alarm must be replaced if:

• The unit is installed for over 10 years

(check the "replace by" date marked on

the side of the unit).

Before the Alarm is safely discarded,

remove from the mounting plate &

disconnect the batteries.

Do not put the Alarm into a fire.

The Alarm should be disposed in a safe and

environmentally sound manner at your local

recycle center. Contact your local authority

for further advice.

7. Getting Your Alarm Serviced

If your Alarm fails to work after you have

read the sections on Installation and

Testing, Maintenance, and Power Supply

Monitoring, contact Tech Support at the

phone number provided at the end of this

guide.

For product returns, ensure the product is

shipped with the batteries disconnected

and return to Alula, Attn: RMA, 2340 Energy

Park Drive, Suite 100, St. Paul, MN 55108.

8. Troubleshooting

Alarms sound for no apparent reason:

• Check for fumes, steam, etc. from the

kitchen or bathroom. Paint and other fumes

can cause nuisance alarms.

• Check for any sign of contamination such

as cobwebs or dust. Clean the Alarm as

described in Section 6.4 if necessary.

• Press the Test/Silence button on the Heat

Alarm (this can be identified as the Alarm

with the red light flashing rapidly) – this will

silence the Heat Alarm for 10 minutes (and

also silence all other interconnected Alarms

in the system).

The Alarm fails to sound when the Test

button is pressed:

• Check the age of the unit - see the

"replace by" label on side of unit.

• If necessary replace the batteries with

Panasonic

CR123A.

9. System Compatibility and

Wireless Verification

Heat alarm model RE617 has only been

evaluated at ETL with Alula Connect+

Model#: RE6100.

Test the system after finishing installation,

enrollment, and configuration. Verify

proper operation of all installed sensors and

peripherals using the Connect+ Installer

app or the interactive services provider's

web portal. All sensors and peripherals

should score at least one bar on the RF

signal strength indicator.

Heat Alarms should be tested after installed

and weekly by pressing the test button on

the detector. Connect+ will indicate it has

properly received a test signal by sounding

a temporal three sound for a Heat Alarm.