Alula RE934ZT Manuel - Sayfa 3
Bilgisayar Donanımı Alula RE934ZT için çevrimiçi göz atın veya pdf Manuel indirin. Alula RE934ZT 4 sayfaları. Translator and zwave expansion card
Ayrıca Alula RE934ZT için: Hızlı Başlangıç Kılavuzu (4 sayfalar)
Sayfayı Yazdır•
Place panel in sensor enrollment mode.
•
Activate particular 2GIG sensor as follows:
◦
◦
◦
◦
◦
Testing
• Verify in the web portal or installer app that the device shown, device
type, and settings are correct for each zone.
• Verify that the correct number of zones were enrolled into the panel.
• Test each zone to verify proper operation.
Z-Wave
Z-Wave devices can be controlled via the Interactive function.
Picture
Green LED:
ON – When panel is AC powered
OFF – When panel does not have
AC power
Flickers – With each sensor packet
received
Red LED:
Normally Off, flashes with each
Zwave message received from
panel
DWS: Cycle the door or window contact three times, either open-close-
open or close-open-close. Allow 2 or 3 seconds between actions.
PIR: Press and hold tamper button and insert battery
Glassbreaks: Open and close the cover of the sensor
Key fobs: Press and hold Arm Away and Disarm buttons simultaneously
Panic: Press the panic button
RE934ZT_Translator and Z Wave Expansion Card
47-0052-00_Rev A00 Tech Support Line: (888) 88-ALULA (888) 882-5852
alula.net