Artone PD-120D Kullanıcı Kılavuzu - Sayfa 6

Amplifikatör Artone PD-120D için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Artone PD-120D 8 sayfaları. Mini stereo mixer amplifier

Input & Wiring Instruction

Connect loudspeakers to amplifier on screw terminals.The loudspeakers must be connected in a series or

parallel circuit so that the charge impedance of the loudspeakers is the same as the charge impedance of

the amplifiers, and that the power supplied by the amplifier does not exceed that withstood by the loudsp-

eakers.Loudspeaker's resistance during operation must not exceed 8 ohm or fall below 4 ohm.

Stereo Mode

The amplifier can operate two speakers or two speaker groups. It is able to deliver 2 x 300 watts for 4Ω

speakers and 2 x 200 watts for 8Ω speakers. Connect speaker with red (positive) and black (negative)

terminals in this mode.

Bridged Mode

Output power of amplifier can be doubled to switch over to bridge mode and operate one speaker or one

speaker group. Connect speaker with two red screw contacts in bridged mode The final impedance must

be working at 8Ω stable use.

Alternatively, it is possible to operate one 100V PA speaker or speaker group in 200 watts. In this case, use

the two positive terminals (red) for the connection.

TUNER/CD/PC/etc.

Power Amplifier

Stereo Mixing Power Amplifier

EARPHONE

FLASH

PLAYER

DISC

09:16

Loudspeaker

page 5

PROFESSIONAL STEREO MIXER AMPLIFIER PD-120D

www.ampspk.com

Loudspeaker

Интернет-магазин SEMENOVIP.RU

Dynamic

Microphone