Artopex downtown Kurulum Kılavuzu - Sayfa 6
İç Mekan Mobilyaları Artopex downtown için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Artopex downtown 13 sayfaları.
Sayfayı Yazdırdowntown
MEDIACOM TABLES
Mediacom bistro table
Parts to assemble
Technical panel
Finishing cap
Structural beam
Gable
Step 1 :
Screw the beams to the gable and the technical panel using the
pre-drilled holes.
Step 2 :
Screw the surface to the gable and the beams.
Step 3 :
If applicable, install the multi-outlet :
* For access to the interior of technical panel, see p.7
M4 - pivoting multi-outlet module
Install the multi-outlet into the cut-out on the surface, and
place the electrical cable throught the grommet and the
technical panel. The electrical cable will exit through the back
of the technical panel.
M8 - Downtown Connection
Refer to pages 8 and 10 for the installation steps for
Downtown Connection.
Install the vertical cable conduit :
- Using the pre-drilled holes, attach the screws into the
technical panel by screwing lightly.
- Place the vertical cable conduit on to the screws.
6
Surface
Step 4 :
Using the double-sided tape provided, attach the finishing cap
onto the brackets of the structural beams.
Finishing cap :
NOTE :
* Under a table with an M4 multi-
outlet module, 2 finishing caps must
be installed. One on the gable and
one on the technical panel.
Mediacom table with architectural base
Parts to assemble
Technical panel
Step 1 :
Aligned with the inserts, screw the modesty panels to the
technical panel and to the architectural base.
* The large triangular brackets must be screw on the technical
panel.
Step 3 :
Before installing the work surface, if it applicable, install the
Downtown Connection (M8) in the architectural base, refer to
pages 8 and 9.
Step 4 :
Screw the surface to the brackets, the modesty panels and the
architectural base.
Step 5 :
If it applicable, install the pivoting multi-outlet module (M4).
Install the multi-outlet in the surface, and place the electrical
cable in the grommet and the technical panel. The electrical cable
will exit through the back of the technical panel.
Installation guide
* Under a table with a Downtown
Connection System (M8), only one
finishing bracket is installed on the
gable side.
Triangular brackets
Modesty panels
Surface
Base