Artos M06845 Kurulum Kılavuzu - Sayfa 5

Yiyecek Isıtıcı Artos M06845 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Artos M06845 7 sayfaları. Denby towel warmer

Bracket Installation:

3. Attach bracket pieces 1,2,3, and 4 to towel warmer using diagram 1 below as a guide.

Typically the brackets are positioned between the 2nd and 3rd bars from the top and

bottom. To allow maximum hanging space for the towel, position brackets as near to

the edges as possible.

4. Determine location of #6 outer rear cylinder by measuring the brackets attached to towel

warmer. Attach #6 cylinder to wall with hole for #7 locking screw facing down on the bottom

brackets and facing up on the top brackets.

5. Push towel warmer onto the wall, inserting #4 into #6.

6. Insert lower locking screws ( #7 ) . Snap on caps #8.

Diagram 1

#8 Cap

Valve Installation: ( use Diagram on page 6 as a guide )

7. Thread # 1 male stub into female inlets on bottom of towel warmer using a threadlocking

substance.

8. Push # 2 compression fitting onto supply pipe and tighten onto valve body.

9. Tighten #1 male stub ( now attached to towel warmer ) onto valve.

10.Insert blanking plugs ( provided with brackets ) into female inlets located at the top of

towel warmer.

11.Check for leaks.

#2 Front Cylinder

Head

#1 Securing

Bolt

Horizontal Bars

INSTALLATION STEPS

#3 Rear Cylinder Head

#5 Wall Fixing

Screw

#4 Inner Rear

Cylinder

#7 Locking Screw

#6 Outer Rear Cylinder