Aluprof DC 661 Programlama Kılavuzu - Sayfa 3

Verici Aluprof DC 661 için çevrimiçi göz atın veya pdf Programlama Kılavuzu indirin. Aluprof DC 661 4 sayfaları.

DC 661 PROGRAMMING MANUAL

2.2. Clock setting

Programming of the timer can be performed only in 'MAN' mode.If there will be a bigger interval during the

programming than 60 seconds the timer will go from the setting mode out.

The operation of the „UP"

Hold the „SET P2" button for

Hold the „MODE/K-" button for

Use the „MODE / K -" button

and „DOWN" keys changes

3second will switch the

5seconds till the hour will blink

to go to the minute settings

transmitterto the 'MAN' mode.

the hour settings

The operation of the „UP"

Press the „MODE/K-" to confirmthe

The operation of the „UP"

By pressing the „OK / K +" button for

and „DOWN" keys changes

minute.

and „DOWN" keys changes

approx. 3 seconds we confirm all

the minute settings

the day of the week settings

entered changes

Press the „MODE / K -" button

to start the clock.

We reserve the right to any technical change. Valid on 2019.04.12