ALUPROFF AC226-01 Programlama Kılavuzu - Sayfa 3
Verici ALUPROFF AC226-01 için çevrimiçi göz atın veya pdf Programlama Kılavuzu indirin. ALUPROFF AC226-01 4 sayfaları.
Sayfayı Yazdır4. PROGRAMMING OF THE FIRST TRANSMITTER.
Press and hold "TOP" button.
5. 200 METERS (IN OPEN SPACE), 35 METERS (INSIDE BUILDINGS)
With the power on, press and
hold down the "STOP" button.
For the AC116-04 transmitter, instead of the "UP" button, press the selected channel number twice.
6. PROGRAMMING THE DIRECTION OF MOVEMENT
With the power on, press
and hold down the "STOP"
button.
7. ACTIVATION OF THE IMPULSE MODE
With the power on, press and
hold down the "STOP" button.
We reserve the right to any technical change.
Valid on 2021.05.21
PROGRAMMING MANUAL FOR AC226-01 TRANSMITTER
...
After 3 seconds turn on the power of
the transmitter. You will hear an
acoustic signal. Release
the button.
...
After 5 seconds, you will hear
an acoustic signal. Release the
button.
...
After 5 seconds, you will hear an
acoustic signal. Release the
button.
...
After 5 seconds, you will hear
an acoustic signal. Release the
button.
Press the "UP" button again.
Press the „Up" bUTTOn
Press the „DOWn" button
Press the „STOP" button.
3 X
Correct programming of the
transmitter will be confirmed by an
acoustic signal (3x BIP).
3 X
Correct programming of the
transmitter will be confirmed by an
acoustic signal (3x BIP).
3 X
Correct change of the settings
will be confirmed by a
acoustic signal (3x BIP).
3 X
Correct change of the settings
will be confirmed by a
acoustic signal (3x BIP).
3