Cutting Edge GL2100 Kullanıcı Kılavuzu - Sayfa 15

Veri Kaydediciler Cutting Edge GL2100 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cutting Edge GL2100 18 sayfaları.

4.4.6

4.4.7

4.4.8

4.4.9

4.4.10 Reset Timer to Transmit

Page | 15

Location

Clicking on the Location button

a GPS available

Timers

Clicking on the Timers button

transmission is allowed and when the time will be saved to Eeprom.

EEPROM CLEAR / RESET CPU

To reset the parameters or to reset the CPU, click on the EEPROM CLEAR tab

and click set.

The device will then clear all parameters from memory and restart the unit. The

dialogue box will respond with the initialize screen. (Partial screen shown)

Clear Pending Data

To clear pending transmission data from the GL2100 go to the Clear Pending

Data tab and click the button.

The dialogue box will respond with

To reset the minimum time between transmission on the GL2100 go to the

Reset Timer to Transmit tab and click the button.

The dialogue box will respond with

will display the current GPS coordinates if

will show how much time before the next