DLab Thermo Control HC110-Pro Kullanıcı Kılavuzu - Sayfa 12
Laboratuvar Ekipmanları DLab Thermo Control HC110-Pro için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DLab Thermo Control HC110-Pro 19 sayfaları.
Sayfayı Yazdır
Temp.
Speed
Timer
Prog.
Note: Before the setting of the second
step complete, system consider there is only one
step by default. But after the setting complete,
the actual steps will be shown correctly. Refer
to below figure.
Temp.
Speed
Timer
Prog.
C In the same way, complete the later steps. Then
Set
Actual
---.-
-----
--:--
1-2
Set
Actual
30.5
1500
07:00
2-2
push the adjustable knob to start work. Refer to
below figure.
Temp.
Speed
07:00
Timer
Prog.
Prog. shows the program and step number. Refer to
the figure, there are 2 steps totally, now it's the
second step.
Note: Before the time is set, the step will not take
effect. If set time to 00:00, it means continuous
working mode. Before complete the setting for
the current step, can't enter next step.
Set
Actual
30.5
30.5
1500
800
06:59
2-2
RUN