Aluratek AUS0202 Hızlı Başlangıç Kılavuzu

Anahtar Aluratek AUS0202 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Aluratek AUS0202 2 sayfaları. 2/4-port usb 2.0 auto sharing switch
Ayrıca Aluratek AUS0202 için: Hızlı Başlangıç Kılavuzu (1 sayfalar), Ürün Referans Kartı (1 sayfalar), Hızlı Başlangıç Kılavuzu (1 sayfalar)

Sayfayı Yazdır

2 / 4-Port USB 2.0 Auto Sharing Switch

model AUS0202 / AUS0204

Quick Start Guide

qsg Q10006 / Q10007

Auto Sharing Switch Highlights (2-Port model shown)

CPU ports

CPU selection button

USB port for peripheral device

LED's

Power adapter port

AOD Software Switching Installation

For PC Only

Please insert the installation CD into CD-ROM drive. The auto-start should start the

installation wizard. If auto-start is disabled, please find and double click CD-ROM

drive in "My Computer" to start the installation wizard.

Step 1:

Please click "Next"

Introduction

Thank you for choosing Aluratek® to serve your USB peripheral sharing needs. We

hope you are pleased with the Aluratek® product you purchased. In no time, you will

able to share your peripheral device between multiple computers. In addition to making

sure only quality materials are used for manufacturing, Aluratek® is also dedicated to

provide the best customer satisfaction and support.

The goal of Aluratek is to embody "Simple Elegance" in every product it designs,

manufactures and sells.

The product focus of Aluratek is to bring simple yet elegant connectivity solutions to the

consumers to enhance their consumer electronics, communications and computing

experience. Each product is carefully designed with the consumer in mind. Each product

is solution-driven to address the need of the consumers and deliberately planned to

provide the ultimate user experience.

Read this guide thoroughly and follow the installation and operation procedures carefully

to prevent any damage to the unit and / or any of the devices it connects to.

Manual Switching Installation

Step 1:

Connect the computer to the switch

using the supplied USB 2.0 A-B cable

Repeat step 1 for the 2nd computer

(3rd and 4th if applicable for AUS0204)

Step 2:

Step 3:

Please click "Next"

Features & Requirements

Features:

• Enable two (AUS0202) or four (AUS0204) PCs and/or Macs to share any USB

device such as scanners, printers, external hard drives, MP3 players & more

• Fully compliant with USB 2.0 specification with data transfer rate up to 480 Mbps

• Backward compatible with USB 1.1 specification

• Manual computer selection through pushbutton

• Easy AOD (Access-On-Demand) switching software (Windows only)

• Supports idle time-out switching and automatic print sharing

• Bus Powered – No external power supply needed

• Plug-n-Play, Hot swappable, and Hot pluggable

• Limited 1 Year warranty

Requirements:

• Windows 98SE, ME, 2000, XP & Vista

• Mac OS X or later

• Available USB por

Step 2:

Connect the peripheral device that

you want to share to the switch

*Power adapter may be needed for some

peripheral devices that require more power.

Step 4:

Step 5:

Please click "Install"

Please click "Finish"

Step 6:

Restart the computer

Package Contents

Your order has been carefully packaged and inspected. The following should be included in your package.

Please inspect the contents of the package to ensure that you have received all items and that nothing has

been damaged. If you discover a problem, please contact us immediately for assistance.

2 / 4-Port USB 2.0

(1) x USB 2.0 A-B Cable (6ft)

Auto Sharing Switch

(1) x USB 2.0 A-B Cable (3ft)

Quick Start Guide

Warranty / Registration

Installation CD

Card

Step 3:

Push the "Select" button to the desired computer to use the peripheral.

Please allow 30 seconds between switching as the computer needs to

associate with the device.

Step 7:

Repeat steps 1-6 for each computer that will be using the AOD feature

To access the USB device from any computer

1. Make sure the auto switch's "Auto" LED is selected. This can be done simply by

pressing the "Select" button until the "Auto" LED is lit

2. Double click the "USB Switch Control" icon on the desktop to start the application

3. Double click on the "USB switch" icon in the taskbar if the device is available

4. You are now able to use the connected USB device from your computer