Alva GHP16 Kullanım Kılavuzu - Sayfa 16
Gazlı Isıtıcı Alva GHP16 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Alva GHP16 17 sayfaları.
Sayfayı Yazdır
Q:
Why must there be ventilation when using a gas
heater?
A:
Whenever fuel (LP Gas in this case) is burned,
ventilation is needed. Any fire needs oxygen to burn.
Think of a fireplace, you require a chimney or flue for
the smoke to exit the house. Even though a gas heater
does not generate smoke, it still generates carbon
monoxide and carbon dioxide, which can be dangerous
if not diluted by fresh air. Always ensure adequate
ventilation by leaving a door or window open in the
same room.
Q:
How long will the gas in my cylinder last?
A:
This depends on how you use your heater. It is easy to
calculate your gas consumption. Take the capacity of
the gas cylinder in grams (i.e. 9000g for a 9kg
cylinder) and divide it by the gas consumption of the
heater, on your desired setting (refer to the Technical
Data section in this manual (page 13). The answer to
the calculation is the approximate number of hours that
your heater will burn for.
Q:
What do I do if I have an over-filled cylinder?
A:
The best method to determine if your cylinder is over-
filled is to weigh it. Subtract the 'tare' mass from the
cylinder weight – this gives you the weight of your gas.
If this gas weight exceeds your cylinder design weight
(9kg) then return the cylinder to your gas
supplier.
Model
Type of Gas
Operating pressure
Injector size
Gas Consumption
Heat output
This appliance operates with a Bullnose 5/8" BSP
left hand thread with a 2.8kPa SANS 1237
approved 1kg/hr flow rate regulator.
SPECIFICATIONS
ALVA GHP16
LPG
2.8kPa
Identification marked
870gr/hr at MAX
9000 - 43000 BTU /13kW
Regulator supplied.
13
How to test if
your cylinder
is overfilled
http://www.
youtube.com/
watch?v=Ya
vsYE8nzCw
&feature=plcp