Alva GDH100 Manuel - Sayfa 9

Hob Alva GDH100 için çevrimiçi göz atın veya pdf Manuel indirin. Alva GDH100 18 sayfaları.
Ayrıca Alva GDH100 için: Manuel (17 sayfalar)

NOTE: After installing and connecting the hose to the hob and

regulator, and the regulator to the gas cylinder, a gas leak test must

be performed as detailed on page of the booklet.

PERMANENT INSTALLATION

The Gas Fitter must provide you with a written certificate after com-

pletion of the work. Failure to comply with the above will render

the warranty invalid. Before the installer hands over the installed

appliance be sure that you fully understand:

The position of the isolation or shut-off valve in the gas supply

line to the hob.

The requirements for safe operation of the hob.

GAS:

(1) This appliance is designed for use only with LP gas

(2) Important:

Check for any leakage in your cylinder or connecting hose by

using soapy water around all connections. If a flexible hose is

being used, it should be of minimum length to avoid bending.

Periodic checks are recommended for your own safety.

(3) Replace a Jet:

Remove the burner cap as well as the aluminium cap. Use a suit-

able tool to replace the jet (as indicated in picture below).

NOZZLE

CLAMP

AND HOSE