Alvarado CSG Kurulum ve Bakım Talimatları Kılavuzu - Sayfa 8

Eskrim & Kapılar Alvarado CSG için çevrimiçi göz atın veya pdf Kurulum ve Bakım Talimatları Kılavuzu indirin. Alvarado CSG 10 sayfaları. Bi-directional waist high security gate

Sayfayı Yazdır

Maintenance

Alvarado recommends performing the maintenance steps below every (60) days. Maintenance should be performed

more frequently in high use applications and/or in dusty or humid environments.

1. Anchoring: Check that the anchors are tensioned to 20 ft-lbs. Tighten if necessary. Clean any accumulated dust

and dirt from the anchors and flange.

2. Leveling: Verify the hinge post and gate arm are horizontally and vertically level. Shim as necessary. Ensure the

gate arm and hinge post form a 90° angle.

3. Overtravel: Check the gate for overtravel. Overtravel is defined as the gate swinging in excess of 90° from the

closed position. Overtravel can lead to the gate arm colliding with adjacent fixtures, potentially causing damage to

the fixture and/or the gate. If the gate overtravels, refer to the Adjusting Swing Limit section on page 6.

Appendix A - Signage

The CSG,SSG, and CFG gates are equipped with two infill bars for mounting signage.

Fig. A1

SSG with Custom Sign

A custom sign can be mounted to the CSG/SSG.

(Custom sign not included)

Page 8

PUD3570R2-0

CSG/SSG/CFG Installation and Maintenance Instructions

For Assistance: [email protected] (909) 591-8431

Fig. A2

CFG with 8" x 12" Handicapped Sign

The CFG model comes with a clear acrylic sign

with a handicapped logo.

Created on: 10/7/2013