DLS Flatsub 8 Large Kullanıcı El Kitabı - Sayfa 4

Konuşmacılar DLS Flatsub 8 Large için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. DLS Flatsub 8 Large 4 sayfaları. On-wall speakers

Placing in the room

The Flatsub 8 is designed for hanging on a wall, down near the floor

as in the photo, or any other position on the wall. A wall bracket is

included with the speaker. The wall bracket is attached on the wall as

in the drawing below.

Another way is to place it lying under a furniture, for example a sofa.

Horizontal adjustment

Contact:

DLS Svenska AB

P.O. Box 13029,

SE-402 51 Göteborg

SWEDEN

Phone: +46 31 840060,

Fax: +46 31 844021

e-mail: [email protected], www.dls.se

Change of hanging direction

The hanging direction of Flatsub 8 wall can be changed by moving the

wall bracket as described below.

1. This photo shows the original placing of the wall bracket. Fig 1.

2. Remove the bracket by removing it from the rear side using a

T30 torx screw driver.

Remove the lower right removable foot. See figure. 1& 2

3. Remount the bracket and adjustable foot as in figure 3.

Remove

Fig.1

Fig.2

Remount the

bracket here

Remount the

foot here

Fig.3

Remove