AKO BY 801 S Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 7
Isıtıcı AKO BY 801 S için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. AKO BY 801 S 16 sayfaları. Infrared radiator
Ayrıca AKO BY 801 S için: Kurulum ve Kullanım Talimatları Kılavuzu (12 sayfalar)
Sayfayı Yazdır
4. Faults
If the heating device does not give off heat, check the
following points:
Is the display at "0"?
Is the fuse in the fuse box switched on?
If you cannot remedy the fault, please contact your
electrical retailer.
If required, you can also address your queries to the
service hotline of Glen Dimplex Deutschland GmbH.
Tel: +49 (0) 9221 709-564
Fax: +49 (0) 9221 709-589
To process your order, please state the device type as
well as its production number (E No.) and manufactur-
ing date (FD). This information is listed on the type
plate.
Repairs and corrective measures may only be carried
out by a qualified electrician or by your after-sales ser-
vice.
5. Cleaning
Switch off the device and let it cool down before clean-
ing it. Note! Do not touch the reflector or heating ele-
ment with bare hands.
External device surfaces can be wiped with a damp
cloth and domestic cleaner; they must be thoroughly
dried afterwards.
No scouring agents or polishes should be used.
Dust which gathers inside the device can be removed
using a brush with soft, long bristles.
If the device is heavily soiled, it should be cleaned by a
specialist.
6. Changing the Heating Element
A heating element must only be changed by a special-
ist.
Pull the device plug and let the heating device cool
down.
Do not touch the heating element or reflector with bare
hands. Use a cloth to protect the surface.
Glen Dimplex Deutschland GmbH
Am Goldenen Feld 18
D-95326 Kulmbach
Subject to modifications without prior notice
www.dimplex.de/en
B
A
Loosen the front grill screws (A) and remove the
front grill.
Remove push-on connections using a suitable tool.
Pull out the two fixing brackets (B).
Remove the heating element.
Insert new heating element.
Carry out assembly in reverse order.
7. Technical Data
Nominal power
Connection voltage
Degree of protection
Protection class
Dimensions
Weight
8. Warranty
This product is supplied with a two-year warranty ac-
cording to our terms of guarantee.
9. Note on Disposal
Do not dispose of the unit with general house-
hold waste. The device must be taken to a local
waste disposal plant.
Phone number: +49 9221 709 564
Fax:
E-Mail:
www.dimplex.de/en
by-gb-ba · 05/15/D
500 Watts
230 V~, 1/N/PE
IP 24, splash-proof
I, with protective conductor
768 x 100 x 92 mm
1,8 kg
+49 9221 709 589
BY 801 S
B
A
EN-7