DLS Performance series Kullanıcı El Kitabı - Sayfa 3
Araba Amplifikatörü DLS Performance series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. DLS Performance series 4 sayfaları. Reference series car audio speakers
Ayrıca DLS Performance series için: Nasıl Kurulur ve Çalıştırılır (16 sayfalar), Kullanıcı El Kitabı (12 sayfalar), Kullanıcı El Kitabı (4 sayfalar)
Sayfayı Yazdır
Filter installation and connection of MS5A & MS6A
Filter installation and connection of R1073
Connection and tweeter and woofer
on R1073:
The speaker has separate terminals for tweeter and
woofer. Please be sure to connect to correct termin-
als. If connected in wrong way the sound will be bad
and the speaker or filter can be destroyed.
Connect Blue and Black wire to woofer (WF) termi-
nal.
Connect Red and Black wire to tweeter (TW) termi-
nal.
Filter installation and connection of R964
How to connect R964:
1. Normal mode.
In normal use (not Bi-wiring) connect the input from head unit or
amplifier to the woofer input.
Jumper J1 and J2 must be in position IN.
2. Bi-wiring mode.
Bi-wiring means that the signal is separated to the woofer and
the tweeter. For example, when using separate amplifiers for
woofer and tweeter. Both filter inputs are used. Set jumper J1
and J2 in position OUT to separate the filters + and ground.
If you connect the speaker element with active crossover, using
the amplifiers internal filters, you don´t need the filter boxes.
Use 3,5 kHz as X-over point.
Tweeter level: jumper J3 and J4
The tweeter level can be adjusted in three steps by moving the
small jumpers (J2 and J3) inside the filter box.
High level:
J3: IN
Mid level:
J3: IN
Low level:
J3: OUT
FILTER/CROSSOVER INSTALLATIONS
Tweeter
-
+
Silver
Silver/red
-
Black
Black/blue
+
Woofer
Head unit / amp.
J4: IN
J4: OUT
J4: OUT
THE JUMPERS INSIDE THE FILTER:
TWEETER LEVEL: JUMPER J1
Select tweeter level by moving the small jumper J1 inside
the filter box.
Three steps are available:
High level
Mid level
Blue
_
+
Black
WF
TW
_
+
Red
Black
WF
TW
IN
Blue
Car stereo / amp.
Black
CONNECTION R964, normal mode:
Tweeter
level
J3 J4
coaxial
2-way crossover
Bi-wiring
IN OUT
on-off
IN OUT
CONNECTION R964, Bi-wiring mode:
Tweeter
level
J3 J4
coaxial
2-way crossover
IN OUT
Bi-wiring
on-off
IN OUT
Low level
Red = + Black = -
Car stereo / amp.
Amp. for tweeter
Amp. for woofer