DLS CRUISE CRPP-2.6CX Kullanıcı Kılavuzu - Sayfa 3

Araba Stereo Sistemi DLS CRUISE CRPP-2.6CX için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DLS CRUISE CRPP-2.6CX 12 sayfaları.

Sayfayı Yazdır

Included products:

2pcs Coaxial speakers

Included in box:

4pcs Adhesive foams for wrapping

4pcs Terminal crimp connectors

10pcs Blind rivets

1pc PRY Tool

1pc Manual

Pre installation

Disconnect Battery

Before you start the process

of replacing speakers,

disconnect and secure the

negative terminal from your

battery/power source. This

will prevent the risk of

damaging yourself or the

products.

Place the disconnected terminal in a secure and

isolated location away from any possible

connection belonging to the battery/power source

system.

General info

Some sound systems may vary in size of the door

speaker. Make sure that your vehicle has the same

size as this coaxial speaker, before you start the

assembly.

This is a generic mounting instruction. The

approach is similar to all of the described car

models. Some screws and clips may be placed

differently and depending on your car model.

The DLS CRPP-2.6CX can be installed instead of

DLS CRPP-2.6 but the OEM tweeter will in this

case, still be connected.

Installation

Dismount door panel

Dismount the door by removing the cover of the

door panel.

Hint: Use plastic PRY tools to avoid marks on

the panels and destroy the plastic clips.

Usually the clips/screws are placed by the white

rings. It may be different in your vehicle.

In most cases the screws used are Torx T30.

Unscrew them and store them in a safe place,

to re-use when re-mounting the door panel.

Use a wrench, size 10. Normally the bolt is located

at the underside of the door. Turn bolt 90 degrees.