ACP RiderPro Ürün ve Kurulum Kılavuzu - Sayfa 4
İnşaat Ekipmanları ACP RiderPro için çevrimiçi göz atın veya pdf Ürün ve Kurulum Kılavuzu indirin. ACP RiderPro 17 sayfaları. Motorcycle protection for acp sentry barrier tl-4 thriebeam system
Sayfayı Yazdır1
Introduction
RiderPro is a motorcyclist restraint system designed
to reduce the impact severity for riders when
colliding with a roadside thrie beam guardrail barrier.
RiderPro
is
positioned
beam
guardrail
and
motorcyclist
from contacting
posts of the guardrail barrier.
In this application, RiderPro has been engineered in
order that it can be fitted to the following road
safety barrier systems:
• ACP Sentry Barrier W beam System,
Drawing No ACP9016-000
• ACP Sentry Barrier TL-4 ThrieBeam
System, Drawing No S.B.TL-4-
RIDERPRO
2
Specifications
RiderPro Sentry
Barrier ThrieBeam
System
Panel
4.0 m
section
length
Mounting
2.0 m
bracket
spacing
System
5.8 kg/m
mass
Panel
350 Mpa Yield
Material
Strength Steel
thickness 1.0
mm
Bracket
275 Mpa Yield
Material
Strength Steel
thickness 5.0
mm
System
Hot-dip and
Coating
continuous
galvanized
Ref: IM 031 Rev 00
Date: 15/07/2021
Page 4/17
below
the
thrie
prevents
a
sliding
the
supporting
How RiderPro Works.
3
RiderPro is adapted to be installed as a motorcycle
restraint system for the ACP Sentry Barrier either in a
new installation or as retrofitting to existing
installation, as determined by the Road Authority
manager.
RiderPro provides safe rider containment and
redirection through the combination of the
spring-effect of the mounting brackets and the
controlled deformation of the corrugated beams. The
brackets attach directly to the post, so that the
bracket is in contact with the post and absorbs the
impact energy of the fallen rider. Whereas, the
corrugated beam acts to contain and redirect the
fallen rider.
The position of RiderPro beneath the thrie beam
guardrail prevents rider contact with the posts and
provides effective containment and smooth
redirection.
The RiderPro mounting bracket position is an
important design consideration as vertical alignment
with the face of the thrie beam guardrail reduces the
potential for rider snagging.
4
Crash Test
Performances.
RiderPro has been successfully crash tested in Class
C60 with Severity Level I in accordance with the
European Technical Specification CEN/TS 1317-8,
attached to:
•
ACP Sentry Barrier W beam System, Drawing
No ACP9016-000
This crash test procedure is recognized by AS/NZS
3845.2:2017 Road safety barrier systems and devices.
Crash testing simulates an 86 kg dismounted rider
sliding into a 20 m long installed barrier as follows:
•
Impact at the post at 60 km/h and 30°, and
•
Impact mid-span between the posts at 60
km/h and 30°.
Additionally, the RiderPro Sentry has successfully
undergone testing according to MASH-16 TL3 which
included Test 3-30 (1100kg vehicle) and 3-31 (2270kg
vehicle). These additional tests were conducted to
assure the highest safety for the motorcyclist safety
system are met.
Property of
Margaritelli Ferroviaria S.p.A.
06135 Ponte San Giovanni - Italy