aion CRESCENT AMP DISTORTION Manuel - Sayfa 4
Müzik Pedalı aion CRESCENT AMP DISTORTION için çevrimiçi göz atın veya pdf Manuel indirin. aion CRESCENT AMP DISTORTION 9 sayfaları.
Sayfayı Yazdır
PARTS LIST, CONT.
PART
VALUE
D4
1N914
D5
1N914
D6
1N914
D7
1N914
D8
5mm
D9
5mm
D10
1N5817
D11
1N5817
IC1
TL072P
IC1-S
DIP-8 socket
IC2
TC1044SCPA Charge pump, DIP-8
IC2-S
DIP-8 socket
DRIVE
100kB
TONE
10kC
VOL.
100kB
CLIP
SPDT cntr off
PRES.
25k trimmer
VOLT.
SPDT slide
LED
5mm
IN
1/4" stereo
OUT
1/4" mono
DC
2.1mm
BATT
Battery snap
FSW
3PDT
ENC
125B
CRESCENT AMP DISTORTION
TYPE
Fast-switching diode, DO-35
Fast-switching diode, DO-35
Fast-switching diode, DO-35
Fast-switching diode, DO-35
LED, 5mm, red diffused
LED, 5mm, red diffused
Schottky diode, DO-41
Schottky diode, DO-41
Operational amplifier, DIP-8
IC socket, DIP-8
IC socket, DIP-8
16mm right-angle PCB mount pot
16mm right-angle PCB mount pot
16mm right-angle PCB mount pot
Toggle switch, SPDT on-off-on
Trimmer, 10%, 1/4"
Slide switch, SPDT
LED, 5mm, red diffused
1/4" phone jack, closed frame
1/4" phone jack, closed frame
DC jack, 2.1mm panel mount
9V battery snap
Stomp switch, 3PDT
Enclosure, die-cast aluminum
NOTES
Can also use 3mm LEDs.
Can also use 3mm LEDs.
Bourns 3362P or similar.
E-Switch EG1271
Switchcraft 112BX or equivalent.
Switchcraft 111X or equivalent.
Mouser 163-4302-E or equivalent.
Optional. Use the soft plastic type—the hard-shell type will not fit.
Can also use a Hammond 1590N1.
4