10-8 Video Digital Evidence Solutions 10-8 Body Camera Kullanıcı Kılavuzu - Sayfa 9

Güvenlik Kamerası 10-8 Video Digital Evidence Solutions 10-8 Body Camera için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 10-8 Video Digital Evidence Solutions 10-8 Body Camera 13 sayfaları.
Ayrıca 10-8 Video Digital Evidence Solutions 10-8 Body Camera için: Kullanıcı Kılavuzu (13 sayfalar)

Sayfayı Yazdır

Operation

Charging the Battery

There are three ways to charge your 10-8 BC-1 Body Camera:

• 120 Volt Charger (Fastest Charge Rate)

• 12 Volt car charger (Fast)

• USB cable connected to a powered USB computer port (Slow)

A new, or completely drained BC-1 Body Camera battery can

take 6-8 hours to charge fully.

Charging Battery with USB Cable

1. Connect a USB cable with a compatible connector to a computer.

2. Connect the USB cable to the USB port on the body camera.

Battery Status Icons

Low Power

Not Fully Charged

During charging the LED Status Indicator will light up red, the LCD

screen will display "MSDC" and the battery icon. After 10 seconds the BC-1

Body Camera will enable the screensaver for the LCD. Press any button on

the BC-1 Body Camera to exit the screensaver.

When the battery is fully charged, the red LED Status Indicator will turn

off and the battery status icon will display the "Fully Charged" icon.

Fully Charged

Factory Reset

Press and hold both the "Power" and "REC" buttons to reset the BC-1

Body Camera to its factory defaults.

Caution: Do not perform a Factory Reset while recording or while

the device is connected to a computer. Doing so may cause file

corruption and/or damage the internal memory.

Operation