aion Nereus Manuel - Sayfa 2
Müzik Ekipmanları aion Nereus için çevrimiçi göz atın veya pdf Manuel indirin. aion Nereus 10 sayfaları. Octave fuzz
Sayfayı YazdırTABLE OF CONTENTS
1 Project Overview
2 Introduction & Usage
INTRODUCTION
The Nereus Octave Fuzz is based on the Catalinbread Octapussy, an octave-up fuzz that was first
released in 2012 and
The Octapussy was called an original circuit, though they hinted that it was related to the Octavia.
Based on our trace, this is perhaps stretching the truth a bit since the front half of the circuit is very
similar to a silicon Fuzz Face and the octave section is directly lifted from the Octavia.
There are some interesting twists, though, and the end result is undoubtedly better than the sum of its
parts. The Fuzz Face input section has a unique feedback arrangement that acts as a tone control and
softens the fuzz somewhat, and prepares the signal for a better octave in the following stage.
The Nereus is directly based on our trace of the Octapussy. The only change we made was to reverse the
orientation of the output volume control, which was called "Attenuation" on the original and reduced
the volume as it was turned up-most likely a marketing decision on their part to make it seem louder.
USAGE
The Nereus has the following controls:
• Gain sets gain of the fuzz stage.
• Body controls the frequency of the negative feedback path in the fuzz stage, which cuts highs and
emphasizes low frequencies as it's turned up.
• Volume sets the volume level at the output.
NEREUS OCTAVE FUZZ
traced by Aion FX in
10 Licensing
2023.
2