aion CERULEAN Hızlı Başlangıç Kılavuzu - Sayfa 7

Kontrol Ünitesi aion CERULEAN için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. aion CERULEAN 10 sayfaları.

DRILL TEMPLATE

Cut out this drill template, fold the edges and tape it to the enclosure. Before drilling, it's recommended

to first use a center punch for each of the holes to help guide the drill bit.

Ensure that this template is printed at 100% or "Actual Size". You can double-check this by measuring

the scale on the printed page.

Top jack layout assumes the use of closed-frame jacks like the

open-frame jacks, please refer to the Open-Frame Jack Drill Template for the top side.

LED hole drill size assumes the use of a

size accordingly if using something different, such as a 3mm bezel, a plastic bezel, or just a plain LED.

INCH

CERULEAN AMP OVERDRIVE

5mm LED

bezel, available from several parts suppliers. Adjust

125B

0.625"

ø3/8"

ø1/2"

OUT

VOLUME

x: -0.65, y: +1.71

ø9/32"

HARD CLIP

TONE

x: -0.85, y: +0.66

x: 0, y: +0.66

ø1/4"

ø9/32"

CENTER (0,0)

LED

FOOTSWITCH

x: -0.775, y: -1.20

x: 0, y: -1.20

ø5/16"

ø15/32"

Switchcraft

111X. If you'd rather use

ø3/8"

GAIN

x: 0.65, y: +1.71

ø9/32"

SOFT CLIP

x: +0.85, y: +0.66

ø1/4"