DNF Controls 4000CL-O Kullanıcı Kılavuzu - Sayfa 9

Kontrolör DNF Controls 4000CL-O için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DNF Controls 4000CL-O 19 sayfaları. 400 video clip fast access system with odetics protocol

Sayfayı Yazdır

Advanced Features . . .

11. CREATE A CLIP

a.
Press [CLIP LIST]. The CLIP LIST indicator turns on. The display will show "CREATE
NEW CLIP."
b. Press [LOAD]. The display will show the default CLIP ID.
c.
Press [LOAD] to accept the default CLIP ID.
OR
Use [NEXT CUE], [LAST CUE] and Wheel to create a CLIP ID. Use the [NEXT CUE] and
[LAST CUE] keys to position the cursor. Turn the Wheel to select the desired letter.
OR
Create an ID using the numeric keypad, with a maximum of eight characters. Press
[ENTER].
d. Press [LOAD] to create the selected CLIP ID. If the selected CLIP ID already exists, a
warning message will be displayed. To load the existing clip, press [ENTER]. Press [ESC]
to exit without loading the existing clip.

12. CAPTURE FUNCTION

The CAPTURE function allows source material from a VTR to be easily and quickly recorded
into the VIDEO SERVER. A CLIP ID is also created.
VTR1 is always the Recorder (the VIDEO SERVER).
Select VTR [2], VTR [3] or VTR [4] as the source VTR. Any RS422, SONY protocol compatible
VTR can be used.
Use the transport function keys to control the source VTR. Each source VTR has its own set of IN
and OUT points.
a.

SETTING THE IN (OUT) POINT

1)
2)
3)
9
4000CL-O, 400 Clip Fast Access System, Odetics Protocol
Locate the clip to the desired IN (OUT) time.
Press [IN] ([OUT]) to set the IN (OUT) Point. The IN (OUT) indicator will
turn on. The display will show "IN (OUT) xx:xx:xx:xx."
OR
Press [SHIFT] + [IN] ([OUT]) to manually enter a new IN (OUT) time.
Press [ENTER] to save the entered time or press [ESC] to exit without saving.