DNF Controls MAV-555 Kullanıcı Kılavuzu - Sayfa 14

Ağ Kartı DNF Controls MAV-555 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DNF Controls MAV-555 20 sayfaları. 250 clip fast access system with peripheral bus interface option sony dp protocol for sony mav-555 video servers

Sayfayı Yazdır

Reference . . .

17. SETUP MENU

Press [MENU]. The MENU indicator will turn on.

Turn the Wheel to select item to change.

Press [MENU] OR use the Softkeys to change the desired mode for that option.

Turn the Wheel at anytime to select another item.

Press [ESC] at anytime to exit SETUP MENU. The MENU indicator will turn off.

MENU MODES

RECORD

WIND MODE

SLOMO

14 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option

(Turning Wheel Clockwise)

Press [MENU] to select the desired record mode: Lockout, Crash (Full).

Press Softkey to select:

HOLD (Fast wind is maintained only while key is depressed.)

LATCH (Fast wind is initiated and maintained with momentary key press.)

Select fast wind speed (3.9 to 23.7) by pressing Softkey below SPD.

ST300 display shows:

(Non T-Bar version)

ST300 display shows:

(T-Bar version)

NOTE - The T-BAR has a fixed speed range of 0

+100% play speed.

Press Softkey [TBAR] (or [WHEEL]) to toggle between them.

For Wheel only:

Press Softkey [SPDRANGE] to select SLOMO speed ranges.

Press Softkey to select: 0

Press Softkey [BACK] to return to SLOMO MENU.

Press [ESC] to exit OR turn the Wheel to select another item.

For Wheel only:

Press Softkey [PRSET] to select the SLOMO Preset Speed Mode.

Press Softkey [UPDATE]. When exiting SLOMO mode, the last used speed is

saved in the Preset Speed register.

Press Softkey [STATIC]. The Preset Speed register is NOT updated when

exiting SLOMO mode. It is only changed by [SHIFT] + [SLOMO] (PRESET

SLOMO).

SLOMO with:

SpdRange

SLOMO with:

Wheel

SpdRange

+200 OR -100

+200.

WHEEL

Preset

TBAR

Preset

+200 with a detent at