DNP DS-ID400 Ayarlar Kılavuzu - Sayfa 7
Yazıcı DNP DS-ID400 için çevrimiçi göz atın veya pdf Ayarlar Kılavuzu indirin. DNP DS-ID400 10 sayfaları. Digital photo printer
Ayrıca DNP DS-ID400 için: Nasıl Kurulur (2 sayfalar), Kurulum Kılavuzu (10 sayfalar), Ayarlar Kılavuzu (7 sayfalar)
Sayfayı Yazdır
Note
The maximum number of image areas that will be
created is 50.
6
Select [ID Photo] under [Photo].
7
Enter the face size in [Face Size].
8
Enter the distance between the top of the frame and the
top of the head in [Head Line].
Head Line
Face Size
Note
Values for [Head Line] and [Face Size] that will
exceed the image area size cannot be entered.
9
When you finish configuration, click the
button on the toolbar or select [Save] from the [File]
menu to save the template.
Creating portrait photo templates
Perform the procedure in "Creating ID photo templates"
up to step 5, and select [Portrait] under [Photo].
When [Portrait] is selected, [Head Line] and [Face Size]
cannot be specified.
Opening an Existing Template
1
Click the
[Open] from the [File] menu.
The [Open] dialogue box appears.
2
Select the size of the template to be edited from the
[Size] drop-down list.
Templates that have been saved in the specified target
folder are listed in [Template Name].
Memo
If the [Template Name] field is empty, briefly close the
Template Editor. Specify the correct target folder in
which templates are saved at the DS ID Photo Utility
screen.
3
Select the template for editing and click [OK].
The template edit screen appears.
(Save)
(Open) button on the toolbar or select
Basic Operation
7