Aion Electronics Soma Vintage Overdrive Manuel - Sayfa 8
Müzik Pedalı Aion Electronics Soma Vintage Overdrive için çevrimiçi göz atın veya pdf Manuel indirin. Aion Electronics Soma Vintage Overdrive 11 sayfaları. Cornish ss-3 soft sustain
Sayfayı Yazdır
DRILL TEMPLATE
Cut out this drill template, fold the edges and tape it to the enclosure. Before drilling, it's recommended
to first use a center punch for each of the holes to help guide the drill bit.
Ensure that this template is printed at 100% or "Actual Size". You can double-check this by measuring
the scale on the printed page.
Top jack layout assumes the use of closed-frame jacks like the
open-frame jacks, please refer to the Open-Frame Jack Drill Template for the top side.
LED hole drill size assumes the use of a
size accordingly if using something different, such as a 3mm bezel, a plastic bezel, or just a plain LED.
INCH
0
1
CM
0
1
2
SOMA VINTAGE OVERDRIVE
5mm LED
bezel, available from several parts suppliers. Adjust
125B
0.625"
0.625"
ø3/8"
ø1/2"
OUT
DC
HIGH CUT
x: -0.65, y: +1.71
ø9/32"
VOLUME
x: -0.65, y: +0.41
x: +0.65, y: +0.41
ø9/32"
CENTER (0,0)
LED
FOOTSWITCH
x: -0.775, y: -1.775
x: 0, y: -1.775
ø5/16"
ø15/32"
Switchcraft
111X. If you'd rather use
ø3/8"
IN
LOW CUT
x: +0.65, y: +1.71
ø9/32"
SUSTAIN
ø9/32"
8