DO IT+GARDEN 6471.191 Talimatlar Kılavuzu - Sayfa 13

Raflar ve Standlar DO IT+GARDEN 6471.191 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. DO IT+GARDEN 6471.191 14 sayfaları. Christmas tree stand

Sayfayı Yazdır

Care and maintenance

2. Opening the Christmas Tree Stand

→ P. 2, item 2

To open the Christmas Tree Stand, slide the slide of the lever guard mechanism upwards to

the "Open" position (marked in green).

3. Releasing the clamping mechanism

→ P. 2, item 3

Push the foot lever with the tip of your foot downwards past the pressure point.

4. Inserting the tree

→ P. 2, item 4

Position the tree centrally, straight and evenly weighted in the Christmas Tree Stand.

5. Closing the Christmas Tree Stand

→ P. 2, item 5

Operate the foot lever until the four-fold clamping mechanism has ﬁrmly gripped the tree.

Gently shake the tree to test whether the stand has been closed securely, if necessary repeat

the clamping process.

6. Securing the Christmas Tree Stand

→ P. 2, item 6

When the trunk has been secured, slide the slide of the lever guard mechanism downwards

to the "Closed" Position (marked in red).

Attention: Do not reach into the working area of the clamping mechanism during the clamping

process (risk of pinching and bruising)!

7. Filling the Christmas Tree Stand

→ P. 2, item 7

Fill the Christmas Tree Stand with water: When you reach the red display (max.) on the water

level display, the Christmas Tree Stand is full. Do not continue to ﬁll with water otherwise it

will overﬂow. The Christmas Tree Stand may only be ﬁlled after the tree has been set up.

8. Emptying the Christmas Tree Stand

→ P. 2, item 8

Remove the water level display by pulling it our of the housing. This opening can then be used

to empty the Christmas Tree Stand.

Care and maintenance

– Dry the Christmas Tree Stand after use and lightly grease the metal parts. Store in a dry loca-

tion. Before using again check cables and moving parts for stability, cracks etc.

V_01/06/2010