Do-Right Solar SWS-200 Kullanıcı El Kitabı - Sayfa 9
İnvertör Do-Right Solar SWS-200 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Do-Right Solar SWS-200 19 sayfaları.
With the aid of a hose-barb adapter, a length of 1/4" drip irrigation tubing then runs
from the regulator to the still. Leaving this tubing above-ground will pre-warm the
water, thereby increasing the efficiency of the still. However, it may be preferable
to bury this tubing, both for aesthetic reasons and for preventing leaching of
harmless but odorous volatiles from the sun-warmed polyethylene tubing material.
Such volatiles can evaporate and end up in the distilled water, though they are
filtered effectively by the GAC post-filter before entering the carboy. The tubing
attaches to the main valve at the top of the still. To attach the tubing to the barbs, it
is helpful to heat the tubing, either by dipping it in hot water or applying hot air to
it.
In an emergency situation, or when there is no pressurized water, then your solar
still can still operate. The source of water simply needs to be elevated above the
level of the main valve. Please see the section on "Emergency Use" for more
details.